Certified plastic welder in house!

Congratulations to Dynalab Corp.'s Ryan Fitzpatrick on completing this year's DVS (German Welding Society) Plastic Welder Certification Course hosted by Wegener Welding, LLC in Chicago.

Ryan's test welds were sent to Germany for evaluation and certified as top notch placing him at the head of his class.

Ryan (shown at left in photo) is being presented his DVS identification card by Dynalab Corp. Manufacturing & Design Manager, Bill Potter. Ryan is passing on his knowledge to his co-workers in the fabrication department.  

Afon Dry Block Heaters are priced to move

In stock and ready to ship while supplies last!

The Afon DBH Series dryblocks are engineered to be accurate, reliable and economical. A versatile series offers different block configurations and block sizes. The DBH units can be configured with one, two or three separately controlled blocks (information below). The units accept standard aluminum blocks which makes them perfect for any lab.

Aluminum blocks for block heaters are also available at a clearance price of $39.00 while supplies last!

WEBSITE IS DOWN for maintenance

Website is down from 11 am EST on 9/13/17

Dynalabcorp.com and Dynalon.com will both be down for a good part of today as part of scheduled maintenance. We apologize for any inconvenience this may cause and you are welcome to phone our customer service at 800-828-6595 or e-mail labinfo@dyna-labware.com with any questions. 

We will be operating as normal today in regards to orders and shipments.

Empire Farm Days in Seneca Falls, NY

August 8th through 10th

Empire Farm Days is being held in Seneca Falls this year. Come interact with industry leaders sharing the most current knowledge on dairy, crops, fruit and vegetable production, rural living and more.

Dynalab Corp. will be exhibiting products related to farming as well as a high concentration on supplies for the emerging craft beer industry in New York State.

We invite you to meet Steve and Morgan at booth #1005 and don't forget to take time to pause between exhibits and seminars to savor some hot BBQ or cool ice cream!

Empire Farm Days is where you find what you need to make your farming enterprise stronger. Our exhibitors stand ready to answer all your questions! 

If you need assistance, please stop by an Information Booth or ask anyone in an EFD STAFF shirt for help. Stop by the Welcome Center at Lot #504 for a complimentary bag of chips compliments of New York’s potato growers and processors. Enjoy the show!

Lipsol detergent is free

Lipsol detergent is free of chlorine bleaches phosphate and enzyme free

The 125mL sample bottle is also FREE!

With a cleaning performance second to none, new Lipsol marks the arrival of the next generation of laboratory detergent. Lipsol is a non-corrosive, fully biodegradable liquid concentrate, suitable for use with all types of laboratory glassware, ceramics, plastics, rubber, stainless steel and ferrous metals. Lipsol is a highly alkaline mixture of detergent, surfactant and chelating agent suitable for removal of most types of contamination by soaking or use in an ultrasonic bath; not for use in dishwasher.

It's efficiency as a cleaning agent has been proved by extensive testing and then confirmed by field trials with users in a wide variety of applications and scientific disciplines. Lipsol is classified as a non-CORROSIVE. Free supporting independent test reports are available on request as is a MSDS.

Please contact our customer service at 800-828-6595 or by e-mail to request your free Lispol Detergent Sample. Ask for part number 504004-0001 and we will ship you a 125mL sample to try our Lipsol detergent for yourself!

GO with purpose

To booth 3879 at IFT17 to see Dynalon's newest sampling, storing and shipping plastic products for use with food products.

There are meetings. And then there are meetings of the mind.

The most creative minds in the science of food and technology will be waiting for you at IFT17. Share and be challenged by the latest research, innovative solutions and groundbreaking thinking. Take advantage of limitless opportunities to make new connections and expand your professional contacts. Immerse yourself into a community committed to driving innovation and global sustainability.

Dynalon will be showcasing our full line of food sampling apparatus along with many basic plastic laboratory supplies used daily in food processing environments. Come meet Martin and Bob at Dynalon booth 3879 from June 25th to the 28th at #ITF17 in Las Vegas, Nevada.

Just another day machining plastics

Dynalab Corp custom plastic fabrication department machines products for use in laboratories, industry, education and even the home. 

Plastics fill an interesting machining niche somewhere between wood and metal. Until recently there were no specific tools for plastics; wood cutting and metal cutting tools had to be tweaked to perform machining tasks on plastics. Turning, milling, boring, reaming, and threading are all easily accomplished on most plastics. There are a few basic rules to follow.

Plastics are generally poor thermal conductors and care should be taken to control heat. Some possible methods to achieve this include employing a liquid coolant and keeping spindle speeds low. Water soluble cutting fluids can work very well.

Another key element is the cutter material. We have found that un-coated cutters work best as they have dead sharp edges. It is important to put enough load on the cutting tool to create a good chip.

QUOTE YOUR CUSTOM PLASTIC JOB TODAY!

Feeds and speeds are combined to permit the best cut, and there are as many combinations as there are plastics. A common mistake is to feed too slowly with the spindle speed too high, causing great heat. Small diameter tools run at higher speeds than larger diameter tools. Also, try to listen to the cutter, chirping, singing, and chatter are all bad sounds.


Fixturing your workpiece properly is crucial. Top plates for drilling, toe clamps for milling, chucks & collets, and of course vices. Most plastics are non-porous which makes them excellent candidates for a vacuum table hold-down system. 

For further details on Dynalab Corp. and working with plastics please visit our custom fabrication pages or contact customer service.

5KforFA

THE CURE FOR FANCONI ANEMIA IS IN OUR HANDS

Dynalab Corp. is proud to sponsor the 5KforFA annually with a combination of sponsorship money and donated goods.

What is the 5K for FA?

Hilton, NY just outside Rochester: The well-marked 5K for FA course is set on a beautifully maintained cross country trail, winding through both open and wooded areas of the Parma Town Park in Hilton, NY. It's moderately challenging with a few hills. The 5K for FA raises money for the Fanconi Anemia Research Fund in honor of Eli Lana, Hilton, who was born with the disease in 2004. He continues to amaze us every day, and we hope that by raising money for continued research he will have a long, healthy life.

Eli is the nephew of Dynalab Corp's Design & Manufacturing Engineer making this cause close to our hearts. Looking for something to do on a Saturday morning? If so please join us at the 5KforFA Saturday May 6th at Parma Town Park.

NEW Folding Spill Containment Stand

Under counter access due to fold away spill trough!

Dynalab Corp. has designed an innovative spill containment stand that is designed for bench-top use with a folding feature to allow access to drawers and other materials below. Manufactured of 3/8" High Density Polyethylene, this heavy duty spill tray will hold carboys up to 15" in diameter.

Main spill containment tray has a 2 gallon capacity and bottom spill trough will hold up to 1/2 gallon.

Carboy or other dispensing product sits upon a 16" x 12" sliding tray that moves forward for dispensing and then slides back to allow bottom spill trough to fold up and out of the way. Spill containment is possible no matter where the tray is positioned.

107374 Folding Spill Stand Specifications:
Height: 13.5” / 342.9 mm
Width: 16” / 406.4 mm
Depth: 21” / 533.4 mm
Folded: 10” x 16” x 16” / 254 x 406.4 x 406.4 mm
Main Tray capacity: 2 Gal / 7.57 L
Lower Trough capacity: 1/2 Gal / 1.89 L

Weight: 19 lbs / 7.25 Kg

Made in the USA, custom sizes and features are available upon request. Telephone 800-828-6595 or e-mail labinfo@dyna-labware.com for further information.

NEW Plastic Lab Supplies for 2017

In stock and ready to ship!

Dynalon Labware is excited to introduce some of our new plastic lab supplies for 2017. All are available for online ordering through our website or by calling customer service at 800-334-7585.

Among the selection of new products is the new Dynalon Beaker with Handle that makes quick conversions with dual metric and English scales.

Also in stock is the Azlon 500mL Autoclavable Wash Bottle made of Polypropylene and fitted with aone-piece PP closure.

Made in the USA by our custom fabrication shop, Acrylic Holders for Disposal Boxes are available in 3 stock sizes. These holders provide extra protection for cardboard disposal boxes. Additional sizes are available upon request.

The same custom availability holds true for Dynalon's 30 Liter Bio-bin® Autoclave Spill Trays. Ideal spill trays for autoclaving waste disposal containers such as the Dynalon Bio-bins.

Spill containment trays are among our most popular items, available both as stock and custom products.

All NEW for 2017 plastic lab products are in stock and ready to ship! Call customer service at 800-334-7585 with any questions.

Employment Opportunities with Dynalab Corp.

Fabrication Technician – Welder / Assembler(Updated 1/19/17)
Dynalab Corp., 175 Humboldt Street, Rochester, NY, is a Plastics Distribution Company in search of a Fabrication Technician for the Welding Room.

Dynalab offers a great work environment with competitive pay and benefits. This is an “A” Shift position Monday to Thursday, 7:00 a.m. to 4:45 p.m. and Friday, 8:00 a.m. to 12 p.m. A Fabrication Technician in our Welding Room is responsible for welding raw material to work order or print instructions.

Other duties to perform this job successfully include:• Join plastic with welding equipment
• Assembling plastic products mechanically
• Assembling plastic products with adhesive
• Stocking and issuing Fab raw materials
• Initiating data entry information of stock status
• Recycling scrap material
• Maintain a clean shop areaDynalab Welding Plastics Information

These duties must be performed in accordance with our Operations and Safety Policies and Procedures. The following training and experience are necessary to be successful in this position:

• Experience in a relative manufacturing environment helpful
• The ability to read and comprehend instructions and customer specifications
• Experience using drill press, other hand tools

Must possess a strong work ethic and be able to provide good work references. Possess good basic math skills, have adequate communication skills, and be a strong team player. High School Diploma or GED required.*

*Dynalab will only employ those who are legally authorized to work in the United States. Any offer of employment is contingent upon successful completion of a job function evaluation, background investigation and drug screen. Interested candidates need to fax a resume to Marlene D. Beil, HR & PR Manager at (585) 654-8079 or E-mail to:  marlene@dyna-labware.com.

Dynalab Corp. is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.